- Zero-emission van being tested in parallel in everyday use by customers in Germany, Great Britain, the Netherlands and Sweden
Hannover, 18 December 2017 – At its corporate headquarters in Hannover, Volkswagen Commercial Vehicles handed over the first e-Crafter vehicles to an international group of major customers. They will be testing the new electric transporters in everyday use until mid-2018. Dr Eckhard Scholz, Chairman of the Board of Management of Volkswagen Commercial Vehicles: "We have developed the new e-Crafter with our customers and for our customers. We are therefore now integrating selected fleet operators into an initial customer phase so that their findings in daily operations with the vehicles can flow into the final design of the zero-emission van."
Nothing beats practical experience: major customers from Germany, Great Britain, the Netherlands and Sweden are testing out the new e-Crafter vans from Volkswagen Commercial Vehicles in practical use. They are package delivery services, energy suppliers, trades businesses and individual retailers whose vehicles cover between 70 and 100 kilometres per day. Sometimes with each day involving hundreds of starts and stops. These parameters apply to around 85 per cent of the trips made in an urban setting according to analyses performed by Volkswagen Commercial Vehicles on more than 210,000 driving profiles with over 1,500 customers. The e-Crafter has been tailored precisely to these typical city operations and distances with its 100 kW power output, range of around 160 kilometres and an intentionally limited top speed of 90 km/h.
The lithium-ion battery of the e-Crafter is, however, completely integrated into the underbody. This means that the entire cargo volume (10.7 m3) is fully usable; the same applies to key dimensions such as its loading width (1,380 mm) and loading height (1,861 mm). The transporter's maximum payload is between 1.0 and 1.75 tonnes depending on the version. At a CCS charging station supplying 40 kW (direct current), the battery (energy capacity 35.8 kWh) can be charged to 80 per cent after just 45 minutes. If an AC wallbox supplying 7.2 kW (alternating current) of power is used, the battery can be charged to 100 per cent within 5 hours 20 minutes. This is generally done overnight.
The electric van is based on the new Crafter. Like Crafter versions with diesel engines, the new e-Crafter will also launch on the market with state-of-the-art driver assistance and convenience systems. Standard equipment: Park Assist with side protection, a multifunctional camera and a rear view camera system. Other standard features include automatic climate control (Climatronic), seat heating, comfort seats, a navigation system, mobile phone preparation module and LED headlights. The e-Crafter will be available in September 2018. By then it will have the distinction of having already been extensively tested by customers in practice and made fully ready for the market.
The lithium-ion battery of the e-Crafter is, however, completely integrated into the underbody. This means that the entire cargo volume (10.7 m3) is fully usable; the same applies to key dimensions such as its loading width (1,380 mm) and loading height (1,861 mm). The transporter's maximum payload is between 1.0 and 1.75 tonnes depending on the version. At a CCS charging station supplying 40 kW (direct current), the battery (energy capacity 35.8 kWh) can be charged to 80 per cent after just 45 minutes. If an AC wallbox supplying 7.2 kW (alternating current) of power is used, the battery can be charged to 100 per cent within 5 hours 20 minutes. This is generally done overnight.
The electric van is based on the new Crafter. Like Crafter versions with diesel engines, the new e-Crafter will also launch on the market with state-of-the-art driver assistance and convenience systems. Standard equipment: Park Assist with side protection, a multifunctional camera and a rear view camera system. Other standard features include automatic climate control (Climatronic), seat heating, comfort seats, a navigation system, mobile phone preparation module and LED headlights. The e-Crafter will be available in September 2018. By then it will have the distinction of having already been extensively tested by customers in practice and made fully ready for the market.
Comments